Health Fitness

How to activate MMS water purification drops

When activating Sodium Chlorite or MMS Water Purification Drops, an acidic substance must be added to form chlorine dioxide in order to provide the ability to kill pathogens. Sodium chlorite can be added directly to water to provide purification of heavy metals and pathogens. A drop of sodium chlorite added to a gallon of water will remove most of the heavy metals and you can drink in 10 minutes. To provide faster purification, activate with one of the substances mentioned below.

Substances used to activate MMS water purification drops

  • Lemon juice
  • Lime juice
  • Unfiltered apple cider vinegar
  • Citric acid

Add 5 drops of raw lemon juice / lime juice / apple cider vinegar / citric acid solution for EVERY drop of MMS.

For example: 5 drops of MMS require 25 drops of lemon juice.

This will form a 10% solution.

After mixing MMS and the 10% solution, wait three minutes to activate before using.

Apple cider vinegar is beneficial to use as an activator for its yeast-killing benefits and non-allergenic properties. There is a small percentage of people allergic to citric acid. If you experience nausea from any activator other than apple cider vinegar, wait 10 minutes and drink water with 1 teaspoon of baking soda added. You can also eat an apple for relief and try apple cider vinegar as an activator.

How to make a citric acid solution

10% solution 5: 1 ratio

Mix 1 tablespoon of powdered citric acid with 9 tablespoons of distilled water and store in the refrigerator. This will make 4 ounces of a 10% solution. When using this mixture, always add 5 drops for every drop of MMS water purification drops.

50% solution 1: 1 ratio

Mix 6 tablespoons of powdered citric acid and 6 tablespoons of distilled water and store in the refrigerator. This will make 4 ounces of a 50% solution. When using this mixture, always add 1 drop for every drop of MMS water purification drops. NOTE: To mix larger amounts of 50% citric acid solution, mix equal measures of citric acid powder and distilled water.

How to Activate MMS with a 50% Citric Acid Solution

Mix 1 drop of 50% citric acid solution for each drop of MMS. For example, 5 drops of MMS would require 5 drops of a 50% citric acid solution. After mixing the MMS and 50% Citric Acid Solution, wait 15 seconds to activate before using. Once you’ve made a particular solution, don’t forget to label your container to avoid confusion if you’ve mixed both solutions. Experiment with all the types of activators mentioned above to find out which one you like best. Using apple cider vinegar not only has the benefit of chlorine dioxide, but also the benefit of killing yeast or candida at the same time.

Once chlorine dioxide is formed, the color of the mixture may turn dark yellow or light brown, this is normal. It means that the two substances have combined to form chlorine dioxide. The mixture can also smell strong, this is another indicator that the mixture has been activated. Do not inhale deeply.

Very important: Do not add vitamin C to your chlorine dioxide mixture, it will deactivate the pathogen fighting power.

These are the four substances that can be used to activate the purifying drops of MMS water or sodium chlorite. Please refer to the websites mentioned below for additional information. Sodium chlorite has been used for water purification in water treatment facilities and by campers / hikers / hikers to form drinking water for several years. When sodium chlorite and an acid combine, a new substance is formed called chlorine dioxide, which is a powerful pathogen killer. Kills parasites, cryptosporiudium, giardia, oocysts, bacteria, viruses, and heavy metals.

Leave a Reply

Your email address will not be published. Required fields are marked *