Real Estate

10 safety tips for power tools

Power tools are essential for professionals and those dealing with DIY jobs around the home. They are favored because they help users save time and also make work easier. However, they must be handled with care, otherwise they may cause injury. Setbacks often occur due to neglect, boredom, and overconfidence. Taking into account the following 10 safety aspects, it is possible to work satisfactorily and safely with power tools.

1. Safety glasses: Prevent dust, debris, wood chips, fiberglass shards, etc. get into the eyes. Safety glasses are one of the most basic safety equipment to use when working with power tools.

2. Hearing protection: Power tools can generate a lot of noise, which can be louder in the cloistered environment of a workshop; To minimize damage to the ears, it is advisable to wear earplugs.

3. Know the right tools for the job: It is important to know the right tools for the job in order to avoid injury to yourself and damage to materials. To do this, it is recommended that you carefully read the instruction manuals provided with the equipment and familiarize yourself with the recommended safety precautions.

4. Correct method of using tools: Tools should not be carried by their ropes; tools not in use should be unplugged; and when handling a tool connected to a power source, fingers should be kept clear of the on / off switch.

5. Proper clothing: Long hair should be tied up and loose clothing avoided. Ideally, full-body clothing should be worn and thick gloves should be worn to prevent sharp implements and splinters from injuring the hands. The masks prevent the inhalation of tiny harmful particles from the material you are working on. Steel toe work boots and hard hats can also be worn.

6. Inspection of tools: Power tools should not be used in humid environments and should never be submerged in water; They should be checked periodically for exposed wires, damaged plugs, and loose plug pins. Bad wires can be taped together, but if a cut appears to be deep, a wire must be replaced. Tools that are damaged or tools that sound and feel different when used should be checked and repaired.

7. Cleanliness in the work area: This must be maintained because accumulated dust particles in the air can be ignited by a spark. Of course, flammable liquids should be kept covered and away from where power tools are used. A clear work area also makes maneuvering the power tool easier; Often times, distractions caused by a tangled cable can lead to an accident.

8. Beware of special tools: Miter saws and table saws should be used with a quick release clamp and a wood pusher, respectively. Special care must be taken when using electric nail guns and belt sanders.

9. Keep tools in place – Power tools should be returned to their cabinets after use to prevent them from being used by an unauthorized and incapable person.

10. Lighting: It is important to use adequate lighting when working with power tools, especially when working in the basement and garage where the lighting may not be satisfactory.

Leave a Reply

Your email address will not be published. Required fields are marked *