Mold, Relative Humidity, Dew Point, and Your Home
Mold is a constant concern for homeowners. Due to the complexity of the biological process, mold is excluded from home inspection contracts. The problem has received so much publicity that many people wonder what conditions could lead to fungal growth in the home. First of all, most of the time, the problem is due to a water problem outside, such as a roof leak or uncontrolled water that has allowed standing water in the crawl space or basement.
When analyzing homes, professionals are often concerned with relative humidity (RH), which is a percentage of the humidity in the air. The air is 100% saturated. It cannot hold any more moisture, so when the air is saturated, condensation forms on the surfaces. We start to see obvious problems when that happens.
The warmer the air, the more moisture it can hold. But when the temperature drops at night, cold air is less able to retain moisture. If a house is 70 degrees F and the RH is 50%, what happens if the temperature drops to 50 degrees F? Simple answer: relative humidity shoots up to 100% and condensation becomes apparent.
The first place a person will probably notice the formation of excess moisture, condensation, is on the windows, but moisture could also be occurring on the walls. Research and experience indicate that condensation generally occurs on walls / cladding and not as often within walls or on insulation within walls.
People often ask this question: What is the optimal relative humidity for my home? That is more difficult to answer than one might, at first, think. The quick number, at least for my region of the country and provided by the Northwest Clean Air Agency, is 30% to 50% with a reading as high as 60% which is generally not a cause for much alarm. Keeping the readings lower is best in the winter.
The problem is the dew point. Remember that the air is saturated when the relative humidity is 100%. Well, the dew point is the temperature at which water condenses inside the house. Some people think that the dew point is a low temperature, around the freezing point, and that such a temperature could never occur inside the house. It is more complicated than that.
Some practical examples are in order. In a house, if the RH is 40% and the temperature is 69 degrees F, the dew point in the house is 44 degrees; the temperature would have to drop to 44 degrees before condensation would form. This is a typical RH and temperature based on my studies in this northwestern region of the country.
In another example, if the RH is 56% and the temperature is 70 degrees F, that change in the equation leads to a dew point of 53 degrees F. Condensation will form if the house drops below 53 degrees F.
In the final example, let’s look at the highest readings that can exist inside a damp house. With 77% RH and a temperature of 73 degrees F, the dew point is 66 degrees F, just 2 degrees below the 68 degrees that many people use as the ideal thermostat setting! If the house goes down to 66 degrees, condensation will form inside.
Obviously, especially in winter, homeowners need to keep the relative humidity low. Where I live, in colder climates, it is more practical to keep a house somewhere above 44 degrees overnight than to keep it above 65 degrees.
This detailed information goes beyond what most people, including inspectors, will engage in on an ongoing basis. A word of warning, while you can get useful information from a relative humidity reading, it takes more than a single reading to get enough information to determine whether or not there is a problem. It takes a bit of study and analysis. And, some homes that appear to have mold growth do not, and the reverse can also be true. Being alerted to this information helps you better understand why some homes have wet spots or stains. Excess humidity caused by high relative humidity can cause damage to plasterboard, wood rot, mold, rust on metal, shrinkage or expansion of wood, reduced thermal resistance of insulation, odors. People often ask what causes high relative humidity. It’s not always easy to tell, but some of the usual suspects are showers, toilets; Cooking; washing clothes, dishes, floors and walls; breathing, sweating; farts; uncontrolled surface waters, basements and wet basements.
If you are personally interested in taking a look at RH inside your home, purchase a relative humidity indicator (hygrometer) at an electronics store or online. You can easily find dew point calculators or “psychological charts” online that allow you to determine dew point from your temperature and relative humidity readings.