What is Plugmold? Introduction to the assembly of multiple outlets
Those who are not inclined to electrical repairs or manual labor do not know what the plugmold is. Technically, Plugmold is a product line of the Wiremold Company, which manufactures and designs wire and cable management solutions. For handymen or electricians, plugmold is just a plug strip.
Many people may have seen a plugmold before, but they don’t know what a plugmold is. and he just perceived it as an ordinary outlet. What is the plug mold? and the advantages of having one installed in your office or home will be discussed in this article.
What is the plug mold? and its uses?
In residential use, mold is commonly found in the kitchen, where it has usually replaced conventional outlets that can disrupt the backsplash. Plug-in molds can be mounted on the backsplash or just under cabinets, where they are hidden or out of sight. Some electricians install plug molds at the bottom where the backsplash and counter meet to hide dangling wires.
Plug molds are also known as plug strips or, as referred to in the Code, multiple outlet assemblies. In schools, laboratories, and the like, plug molds are commonly installed to easily separate extension cords and provide convenient plug outlets when needed. The outlet array can be spaced close together, at regular intervals, and saves time compared to other installation methods. Computer rooms where several computers must be used at the same time use plugmolds as power outlets. Pluggable molds allow you to install 6 to 10 outlets anywhere you need them.
What is the plug mold? commercial and industrial use
Pluggable molds can be used in appliance or appliance stores where many plugs are needed. For example, a store has lamps that need to be plugged in and turned on/off at the same time to show customers. Plug molds can also be used in industrial applications. An example is a repair shop where various welding tools are used. Plug-in molds allow these tools to be powered simultaneously without using extension or interrupt cords. It saves time and serves as a convenient outlet for employees.
While you may not need an electrical permit to install plug molds, you should still check the National Electrical Code, or NEC. There you can investigate about What is the plugmold? and what it says about Wiremold and multi-gang assemblies. Although the NEC allows for surface metal raceways or multi-gang assemblies, there are still limitations on the number of devices you can plug into knockouts. The number of appliances is affected by the amperage and voltage rating of the appliances, and the size of the cord you used in assembling the plug-in molds.
If you intend to install plug moldings or power strip assemblies in your homes, please call a local electrician or refer to the installation guide. Plug molds can also be purchased in two sets: a free-standing strip that is easy to install, and a hardwire strip that can be fed with wire mold metal surface raceways. The self-contained strip comes with a built-in circuit breaker to prevent overloading the circuit.